5 Ways to Install Ring Doorbell Angle Mount

Installing a Ring Doorbell Angle Mount can be a bit tricky, but with the right steps, you can achieve a secure and level installation. Here are five ways to install a Ring Doorbell Angle Mount:

Understanding the Ring Doorbell Angle Mount

Before we dive into the installation methods, it’s essential to understand the purpose of the Ring Doorbell Angle Mount. The Angle Mount is designed to provide a flexible installation option for your Ring Doorbell, allowing you to adjust the camera’s viewing angle to capture more of your porch or yard.

Method 1: Standard Angle Mount Installation

The standard Angle Mount installation is the most common method. This method involves attaching the Angle Mount to the wall next to your door and then mounting the Ring Doorbell to the Angle Mount.

• Tools needed:
  • Drill
  • Wall anchors (included with the Angle Mount)
  • Screws (included with the Angle Mount)
• Steps:
  1. Hold the Angle Mount against the wall next to your door, ensuring it’s level.
  2. Mark the screw holes with a pencil.
  3. Drill pilot holes into the marked areas.
  4. Insert the wall anchors into the pilot holes.
  5. Screw the Angle Mount into place using the provided screws.
  6. Mount the Ring Doorbell to the Angle Mount, following the manufacturer’s instructions.

🔧 Note: Make sure to check the wall type before drilling, as some walls may require special anchors.

Method 2: Corner Installation

If you want to install your Ring Doorbell in a corner, you can use the Angle Mount to achieve a secure and level installation.

• Tools needed:
  • Drill
  • Wall anchors (included with the Angle Mount)
  • Screws (included with the Angle Mount)
• Steps:
  1. Hold the Angle Mount in the corner, ensuring it’s level.
  2. Mark the screw holes with a pencil.
  3. Drill pilot holes into the marked areas.
  4. Insert the wall anchors into the pilot holes.
  5. Screw the Angle Mount into place using the provided screws.
  6. Mount the Ring Doorbell to the Angle Mount, following the manufacturer’s instructions.

🔧 Note: When installing in a corner, ensure the Angle Mount is securely attached to both walls to prevent it from shifting over time.

Method 3: Brick or Concrete Installation

Installing a Ring Doorbell Angle Mount on brick or concrete requires specialized anchors.

• Tools needed:
  • Drill with a masonry bit
  • Masonry anchors (not included with the Angle Mount)
  • Screws (included with the Angle Mount)
• Steps:
  1. Hold the Angle Mount against the brick or concrete, ensuring it’s level.
  2. Mark the screw holes with a pencil.
  3. Drill pilot holes into the marked areas using a masonry bit.
  4. Insert the masonry anchors into the pilot holes.
  5. Screw the Angle Mount into place using the provided screws.
  6. Mount the Ring Doorbell to the Angle Mount, following the manufacturer’s instructions.

🔧 Note: When drilling into brick or concrete, use a slow and steady motion to avoid damaging the material.

Method 4: Vinyl Siding Installation

Installing a Ring Doorbell Angle Mount on vinyl siding requires care to avoid damaging the siding.

• Tools needed:
  • Drill
  • Vinyl siding anchors (not included with the Angle Mount)
  • Screws (included with the Angle Mount)
• Steps:
  1. Hold the Angle Mount against the vinyl siding, ensuring it’s level.
  2. Mark the screw holes with a pencil.
  3. Drill pilot holes into the marked areas.
  4. Insert the vinyl siding anchors into the pilot holes.
  5. Screw the Angle Mount into place using the provided screws.
  6. Mount the Ring Doorbell to the Angle Mount, following the manufacturer’s instructions.

🔧 Note: When drilling into vinyl siding, use a small pilot hole to avoid damaging the material.

Method 5: Stucco Installation

Installing a Ring Doorbell Angle Mount on stucco requires specialized anchors.

• Tools needed:
  • Drill with a masonry bit
  • Stucco anchors (not included with the Angle Mount)
  • Screws (included with the Angle Mount)
• Steps:
  1. Hold the Angle Mount against the stucco, ensuring it’s level.
  2. Mark the screw holes with a pencil.
  3. Drill pilot holes into the marked areas using a masonry bit.
  4. Insert the stucco anchors into the pilot holes.
  5. Screw the Angle Mount into place using the provided screws.
  6. Mount the Ring Doorbell to the Angle Mount, following the manufacturer’s instructions.

🔧 Note: When drilling into stucco, use a slow and steady motion to avoid damaging the material.

In summary, installing a Ring Doorbell Angle Mount requires careful planning and execution. By following the methods outlined above, you can achieve a secure and level installation that provides the best possible viewing angle for your Ring Doorbell.

What is the purpose of the Ring Doorbell Angle Mount?

+

The Ring Doorbell Angle Mount is designed to provide a flexible installation option for your Ring Doorbell, allowing you to adjust the camera’s viewing angle to capture more of your porch or yard.

What tools do I need to install the Ring Doorbell Angle Mount?

+

The tools needed to install the Ring Doorbell Angle Mount vary depending on the installation method. However, common tools include a drill, wall anchors, and screws.

Can I install the Ring Doorbell Angle Mount on brick or concrete?

+

Yes, you can install the Ring Doorbell Angle Mount on brick or concrete using specialized anchors.